Get all your tools ready before starting. You’ll need a shovel for digging, a tape measure for checking distances, and a rubber mallet for pounding stakes. A drill with screws attaches stakes to the board. Tin snips or a saw cut the edging to size. Keep a utility knife handy for trimming turf edges and a wheelbarrow for moving dirt around.
For materials, measure around your entire lawn area and add 10% extra for mistakes and cuts. Buy poly board landscape edging that matches your measured length. Pick up landscape stakes too – one for every 3 to 4 feet on straight parts, and more for curves. Get galvanized screws to attach everything. Have your base materials ready, like crushed rock or road base for drainage. Quality artificial grass products require solid preparation, so don’t skip on getting the right foundation materials.
Step-by-Step Guide to Installing Poly Board Edging
Follow these steps carefully to ensure your poly board edging is secure and provides a lasting, clean border for your artificial turf.
Outline the Project Area and Call for Safety
Mark your installation area with spray paint or string. You’ll see exactly how the final shape looks, and it’s easier to keep your lines straight and your curves flowing. Call 811 before digging to mark underground lines. They do it for free and prevent dangerous accidents.
Prepare the Foundation by Digging a Trench
Dig a trench along your marked line about 3.5 inches deep. The 4-inch board should stick up slightly above ground level. Make the outer wall of your trench as straight up and down as possible. This wall supports your edging and keeps it from tilting.
Set the Poly Board Edging in Place
Place the poly board lawn edging into the trench and press it firmly against the vertical wall. For curves, bend the board gently to follow your design. Having someone help makes this much easier, especially on tight turns.
