grass artificial supplier

Category: Artificial Grass for Dogs

  • Measure and Mark Cut Lines Accurately

    The relaxation period helps the turf recover from its rolled shape and can make final trimming more accurate. It also gives you a better opportunity to confirm the pile direction and identify wrinkles or edge distortion before cutting.

    Measure and Mark Cut Lines Accurately

    Before making any cut, build a precise plan. Unroll the artificial turf on a flat, clean surface and mark your cut lines using a straightedge and chalk or a permanent marker. When measuring panel length, measure from the end of the backing rather than the fibers, which can extend slightly past the edge. Double-check every measurement: you can always trim more off, but you cannot add material back.

    Make a Rough Cut

    For large pieces, do not try to make the final perimeter cut immediately. Start with a rough cut that leaves a small amount of extra material beyond the intended edge.

    Position the turf in its final location and check the fit around walls, fences, posts, trees, and other obstacles. Once the piece is correctly positioned, make the final trim along the actual boundary.

    This two-stage approach gives you room to correct small measurement errors and reduces the risk of cutting a piece too short.

    Cut Parallel to Tuft Rows from the Backing Side

    Flip the turf so the backing faces upward. Hold your metal straightedge firmly along the chalk line and make multiple shallow passes with your blade rather than forcing a single deep cut.

    When preparing panels for seaming, cut parallel to the backing’s tuft rows (stitch lines). Cutting inside the stitch row causes fibers to shed, while leaving too much excess backing creates a visible, bulky gap along the seam.

  • Step-by-Step Guide to Cutting Artificial Grass by Hand

    Straightedge and Measuring Tape

    Precision keeps waste to a minimum. A yardstick or long metal straightedge guides your knife along a straight line, while a measuring tape and a silver marker or chalk let you mark cut lines accurately before you begin. This combination helps the turf fit snugly against fences, curbs, and other obstacles without guesswork.

    Safety Gear: Gloves and Knee Pads

    Cutting turf means working with very sharp blades while kneeling for extended periods. A pair of tough, cut-resistant gloves is the single most important safety item—but even with gloves, stay deliberate to avoid hand injuries. Knee pads make the task far more comfortable and help you focus on each accurate cut.

    Step-by-Step Guide to Cutting Artificial Grass by Hand

    Let the Turf Relax and Acclimate

    Artificial turf is commonly transported and stored in tightly rolled sections, which can leave temporary curls, wrinkles, or tension in the backing. After unrolling the turf, allow it to settle flat before making precise final cuts.

  • How to Cut Artificial Turf

    Whether you’re shaping a backyard lawn around a flower bed, fitting turf along a fence line, or prepping panels for seams, clean cutting is essential to a professional-looking installation. The key is not simply choosing a sharp knife. The turf’s backing, stitch rows, pile direction, and edge construction all affect how and where you should cut.

    01Essential Tools for Cutting Artificial Turf

    Choosing the right tools is the first step toward a clean, professional-looking installation. While artificial turf is built to withstand heavy use, it cuts efficiently with the correct instruments. When assembling your set of artificial turf tools, prioritize sharp blades and accurate measuring gear to avoid ragged edges that compromise the final look.

    Hook Knife or Utility Knife

    A sharp hook knife or a standard utility knife is usually the primary tool for the job. These blades slice through the dense backing without snagging the fibers. You have some flexibility here—a utility blade, box cutter, or carpet knife all work for straight runs, while a hook knife gives more control on curves. Many installers also keep heavy-duty scissors, shears, or snips on hand for smaller detail cuts and final trimming.

    A turf cutter is useful for large installations where long, repetitive cuts need to be made quickly and consistently. It can provide better control than a standard utility knife when working with large turf rolls or thicker backing.

  • Why Drainage Fails Under Artificial Turf on Concrete

    Why Turf Can Drain but Water Still Pools

    Water can pass through a permeable or perforated turf backing, but once it reaches an impermeable concrete slab, it still needs somewhere to go.

    Before installation, identify the slab’s high and low points and determine exactly where water will leave the area. If water already remains on the bare concrete after rain or washing, installing a pad over it does not remove the underlying drainage problem.

    In our experience with concrete-base turf projects, one of the most common mistakes is assuming that a flat, solid slab automatically makes installation easier. The turf itself may drain well, but concrete does not absorb that water. If the slab has no suitable slope, drainage channel, or clear outlet, moisture can remain trapped between the turf system and the concrete, eventually contributing to standing water, odor, and an unstable feel underfoot.

    For outdoor landscape and football turf installed over concrete, we therefore check the drainage path before focusing on the padding thickness. In rainy locations especially, the first question should be where the water will go after it passes through the turf. A suitable cushion or shock pad can improve comfort and performance, but it cannot compensate for a slab that has nowhere for water to escape.

    When You Need a Drainage Mat

    A drainage mat is most useful where water needs additional space to move laterally beneath the turf toward a drain or open edge. Typical applications include balconies, rooftops, pet areas, and other hard surfaces exposed to frequent moisture.

    However, adding a drainage mat does not automatically solve a drainage problem. If water already pools on the bare slab, the slope or drainage outlet should be corrected first.

    Moisture Considerations for Indoor Concrete

    Indoor concrete requires a different moisture check from an outdoor patio. Before installing adhesive, padding, or backed turf, confirm that the slab moisture condition is compatible with the selected turf system, underlay, and adhesive.

    A moisture barrier should not automatically be added above every concrete slab. Whether one is required depends on the slab construction, moisture conditions, and installation system being used.

    How to Handle Concrete Expansion and Movement Joints

    Existing concrete movement or expansion joints should not simply be ignored or rigidly bridged without considering how the slab is designed to move.

    Before fixing the underlay and turf, identify these joints and follow the recommendations of the underlay, adhesive, and flooring system being used. The objective is to keep the turf surface smooth without restricting necessary slab movement or creating a weak line underneath the finished surface.

  • How to Install Turf Underlayment on Concrete

    Drainage Pad vs. Solid Foam: Which Is Better?

    Start with the exposure conditions.

    For an outdoor slab, pet area, or frequently washed surface, drainage usually deserves priority. The system needs to let moisture pass through the turf and then move toward a drain or edge.

    For covered indoor applications where water exposure is minimal, cushioning and stability may matter more than open drainage. Solid or closed-cell padding can therefore be appropriate, provided it is compatible with the turf and installation method.

    Neither type should be assumed to stay in place automatically. Correct joint treatment and fixing are important because movement in the padding can eventually become visible through the turf above.

    How to Install Turf Underlayment on Concrete

    Prepare and Check the Concrete Base

    Start with the existing slab clean and free of loose debris, and patch cracks or spalled areas. The padding can only perform on a stable base, so check for undulations. Pay special attention to drainage: find the low spots where water pools, because liquid sitting beneath the grass leads to mold and odor later.

    Lay, Join, and Secure the Underlay

    Lay the underlay according to the manufacturer’s recommended joint and fixing method, keeping adjoining pieces flat and avoiding overlaps or raised edges that could become visible through the turf. Use fixing methods compatible with the pad, concrete base, turf system, and expected use.

    A detail we often see underestimated is the joint between two pieces of padding. Customers naturally spend more time comparing the turf itself, but problems that appear months later can start in this hidden layer. If padding rolls are poorly aligned, insufficiently secured, or allowed to move independently, repeated foot traffic can gradually create visible joint lines, wrinkles, or uneven areas in the turf above.

    This becomes more important where temperatures vary significantly between seasons because the materials in the system need enough flexibility to accommodate movement. For landscape applications, we focus on keeping the underlay flat and stable so the finished lawn remains smooth and comfortable. For football and other high-use sports surfaces, fixing and joint stability matter even more because the padding must remain consistent under repeated running, turning, and impact.

    Saving a small amount on the underlay or its installation can therefore create a much larger repair job later. Before laying the turf, check the surface again for loose joints, ridges, or movement, and make sure fixing materials do not block the intended drainage path.

  • How to Choose the Right Underlay for Concrete

    There is no single best padding for artificial turf on concrete. The right choice balances cushioning against how the space will be used, so define the use first, then compare materials.

    Choose by Use: Pets, Play Areas, Patios, and Gyms

    ApplicationMain PriorityTypical Starting Point
    Pet runs and dog areasDrainage and odor controlDrainage-capable layer with a clear water/urine exit path
    Play areasImpact attenuation and safetyTested shock-absorbing surfacing system
    Dining areas and light-traffic patiosComfort with a low profileSlim closed-cell or EVA foam
    Home gyms and sports areasShock absorption and stabilityApplication-specific shock pad or foam-backed turf

    For pet areas, drainage-friendly padding can help reduce the risk of urine and water pooling below the surface, but the concrete still needs a clear drainage path. Play areas require impact performance to be considered as part of the complete surfacing system, while patios and light-traffic areas may only need a slimmer comfort layer.

    How Much Padding Do You Need?

    There is no universal thickness or density that makes an underlay suitable for every concrete installation.

    A thicker pad may provide more cushioning, but thickness alone does not tell you how the material will perform under repeated loading. Density, compression resistance, drainage structure, recovery, expected traffic, and the turf system above it all matter.

    For landscaping, the goal may simply be to soften the feel of the slab and maintain a smooth surface. Sports and playground applications require performance to be evaluated against the demands of the complete system rather than choosing the thickest available pad.

  • Types of Underlay for Artificial Turf on Concrete

    Three main underlay systems cover most concrete turf applications: foam cushioning, sports shock pads, and drainage mats. The right option depends on whether the main requirement is comfort, impact performance, drainage, or a combination of these functions.

    Foam Underlay for Comfort and Light Cushioning

    Foam underlay can add comfort and shock absorption over a hard concrete surface, but the required material and thickness depend strongly on the application.

    For playgrounds, do not select padding by thickness alone. The turf, padding, and supporting surface should be treated as a complete surfacing system and selected according to the impact-performance requirements of the project.

    For indoor fitness applications, some turf products integrate the cushion into the product itself. Grace Grass PU foam padded gym turf, for example, is available with a 5–10 mm foam backing for additional comfort, shock absorption, and stability over hard floors.

    Rubber and Sports Shock Pads for Impact Absorption

    Rubber and engineered sports shock pads are used where impact absorption, surface response, and long-term stability matter more than simple walking comfort.

    For football and other sports projects, the pad should be selected as part of the complete turf system rather than as an isolated layer. 

  • What to Put Under Artificial Turf on Concrete

    Artificial grass on a concrete patio, balcony, or walkway looks the same as turf on soil — but it feels completely different underfoot unless the right layer goes between the slab and the grass. That layer, the turf underlayment, can improve cushioning, stability, and drainage over a hard slab.

    01Can You Install Artificial Turf Directly on Concrete?

    When Direct Installation Can Work

    You can sometimes install artificial grass directly over concrete or paving without a separate pad. The slab should be stable, reasonably smooth, and free of problem areas that could show through the finished turf.

    Drainage also matters. Repair or level problem areas as appropriate without blocking the intended drainage path. A covered, low-traffic decorative area is one of the situations where direct installation may be suitable.

    When You Need Underlay, Padding, or Drainage

    An additional layer becomes useful when the project needs more comfort, impact absorption, surface protection, or lateral drainage.

    For wet or outdoor areas, drainage should be assessed before the underlay is selected; the detailed drainage checks are covered below.

  • Daily maintenance and maintenance of hockey artificial turf

    In order to ensure the quality of the ball and the anti-static requirements of the hockey field, the entire field must be pre-sprinkled before each game. According to the water permeability of the artificial turf, the water can generally be maintained for about two hours. (The International Music Federation stipulates that after 35 minutes of watering, the surface retains an average of 3mm of water, and the amount of water in any part should not be less than 2mm).

    Daily maintenance tips:

    It is strictly forbidden to bring food (except purified water) into the venue;

    It is forbidden to directly contact the lawn with oily, corrosive, and other chemicals;

    Sneakers with metal spikes are prohibited;

    Prohibit heavy equipment and unnecessary traffic vehicles from entering the venue;

    It is strictly forbidden to accumulate heavy objects on the lawn for a long time;

    It is strictly forbidden to puncture, strike or cut the lawn with sharp tools and hard objects;

    Do not intentionally overturn the bottom and destructively pull the grass line, sew the joint, etc.;

    When there is less rainfall, artificial watering can be used to wash away the dirt on the grass;

    Appropriately control the frequency of use of the site so that there is enough time to level the site fill (using special equipment or rakes);

    Adhere to cleaning and maintenance once a month, and clean the garbage on the site in time (as far as possible to avoid cleaning the site during high-temperature periods);

    Always check whether the suture is loose, whether the bottom is damaged, tearing, burning, etc. If there are problems such as degumming and wear, it should be repaired in time.

    Hockey Field Construction System – Spraying

    Hockey grass product material and characteristics

  • Hockey Artificial Grass

    Hockey artificial turf is completely different from the football artificial turf that we are familiar with. Due to the characteristics of hockey, its turf must meet the requirements of good water retention, water permeability, strong wear resistance, excellent flatness, and anti-aging. And weather resistance, as well as high grass density, non-directional, always maintaining the direction of movement of the ball, and so on. There are also many requirements for the laying process of the venue. Among them, the dual requirements of water seepage and water retention on the court have put forward a new test for construction. According to the requirements, after the court is sprinkled with water for 35 minutes, the surface retains an average of 3mm of water, and in any place, The amount of water shall not be less than 2mm. To this end, it is recommended to use a five-layer laying method of lime, coarse asphalt, medium asphalt, rubber particle shock absorption layer, and artificial grass to meet the following basic requirements.

    Artificial Hockey Grass Features

    Good water retention and permeability;

    Strong wear resistance and long service life;

    Excellent flatness, anti-aging, and weather resistance;

    The grass has high density, no directionality, and maintains the direction of the ball’s movement;

    Thickened cushion layer, excellent sports performance, and foot feel;

    Environmental protection, no pollution, no fading;

    The artificial grass surface is shiny and not dazzling;

    There are few seams and no marks.

    hockey field